速度药水模组 V1.0
Speed Potion Mod V1.0
76561198072671604
Steam工坊
预览截图
1 张图片
主预览图
左右滑动查看更多 · 点击图片查看原图
模组介绍
！！！
查看英文原文
!!! ATTENTION !!!
The mod was dropped.
On request I can provide, if I manage to recover them, the sources.
____________________________________________________________________
Hi everyone, this is one of the first mods I made.
MOD ID: 2058760617
To make everything work better, it is recommended that you enter the following in "GameUserSetting.ini"
-----------------------------------------------------------------------------------------------------------------------------
[SpeedPotionRed SPMods]
DeactiveAfterTime=500.0
MaxSpeedNotSubmerged=2.0
MaxSpeedSubmerged=2.0
BuffIsPersistent=True
ParticleVisiveEffect=True
RunOnPlayer=True
RunOnDino=True
RunOnOnlyFlyer=False
[SpeedPotionBlue SPMods]
DeactiveAfterTime=500.0
MaxSpeedNotSubmerged=1.50
MaxSpeedSubmerged=1.50
BuffIsPersistent=True
ParticleVisiveEffect=True
RunOnPlayer=True
RunOnDino=True
RunOnOnlyFlyer=False
[SpeedPotionGreen SPMods]
DeactiveAfterTime=500.0
MaxSpeedNotSubmerged=1.25
MaxSpeedSubmerged=1.25
BuffIsPersistent=True
ParticleVisiveEffect=True
RunOnPlayer=True
RunOnDino=True
RunOnOnlyFlyer=False
[RemoveSpeedBuff SPMods]
DeactiveAfterTime=30.0
MaxSpeedNotSubmerged=1.0
MaxSpeedSubmerged=1.0
BuffIsPersistent=True
-----------------------------------------------------------------------------------------------------------------------------
INFO:
-----------------------------------------------------------------------------------------------------------------------------
DeactiveAfterTime = (time it takes for the buff to turn off after it\'s activated, default value 500 sec.)
PS:
if you set 0.0 the buff will not be deactivated and will always remain active.
MaxSpeedNotSubmerged= (walking speed, default value 1.25 for Green, 1.50 for Blue, 2.0 for Red and 1.0 for Remove Buff Potion)
MaxSpeedSubmerged= (speed in water, default value 1.25 for Green, 1.50 for Blue, 2.0 for Red and 1.0 for Remove Buff Potion)
PS:
1.0 is the base value which equals 100%. 1.25 equals 25% more or 125%.
If you set a value lower than 1.0 it will move more slowly.
If you set 0.0 it won\'t move until the buff ends.
BuffIsPersistent=(If set to True, the buff will remain after your death. Default value "True")
ParticleVisiveEffect=(If set to True the buff will show a colored effect, if set to False it will not show any effect. Default value "True")
RunOnPlayer=(If set to True, it allowed humans to use the buff. Default value "True" )
RunOnDino=(If set to True, it allowed the use of the buff to the dino. Default value "True")
RunOnOnlyFlyer=(If set to True it allowed the use of the buff only to dino who can fly. Default value "False". Warning: to work "RunOnDino" must be set to "True")
------------------------------------------------------------------------------------------------------------------------------
The mod was dropped.
On request I can provide, if I manage to recover them, the sources.
____________________________________________________________________
Hi everyone, this is one of the first mods I made.
MOD ID: 2058760617
To make everything work better, it is recommended that you enter the following in "GameUserSetting.ini"
-----------------------------------------------------------------------------------------------------------------------------
[SpeedPotionRed SPMods]
DeactiveAfterTime=500.0
MaxSpeedNotSubmerged=2.0
MaxSpeedSubmerged=2.0
BuffIsPersistent=True
ParticleVisiveEffect=True
RunOnPlayer=True
RunOnDino=True
RunOnOnlyFlyer=False
[SpeedPotionBlue SPMods]
DeactiveAfterTime=500.0
MaxSpeedNotSubmerged=1.50
MaxSpeedSubmerged=1.50
BuffIsPersistent=True
ParticleVisiveEffect=True
RunOnPlayer=True
RunOnDino=True
RunOnOnlyFlyer=False
[SpeedPotionGreen SPMods]
DeactiveAfterTime=500.0
MaxSpeedNotSubmerged=1.25
MaxSpeedSubmerged=1.25
BuffIsPersistent=True
ParticleVisiveEffect=True
RunOnPlayer=True
RunOnDino=True
RunOnOnlyFlyer=False
[RemoveSpeedBuff SPMods]
DeactiveAfterTime=30.0
MaxSpeedNotSubmerged=1.0
MaxSpeedSubmerged=1.0
BuffIsPersistent=True
-----------------------------------------------------------------------------------------------------------------------------
INFO:
-----------------------------------------------------------------------------------------------------------------------------
DeactiveAfterTime = (time it takes for the buff to turn off after it\'s activated, default value 500 sec.)
PS:
if you set 0.0 the buff will not be deactivated and will always remain active.
MaxSpeedNotSubmerged= (walking speed, default value 1.25 for Green, 1.50 for Blue, 2.0 for Red and 1.0 for Remove Buff Potion)
MaxSpeedSubmerged= (speed in water, default value 1.25 for Green, 1.50 for Blue, 2.0 for Red and 1.0 for Remove Buff Potion)
PS:
1.0 is the base value which equals 100%. 1.25 equals 25% more or 125%.
If you set a value lower than 1.0 it will move more slowly.
If you set 0.0 it won\'t move until the buff ends.
BuffIsPersistent=(If set to True, the buff will remain after your death. Default value "True")
ParticleVisiveEffect=(If set to True the buff will show a colored effect, if set to False it will not show any effect. Default value "True")
RunOnPlayer=(If set to True, it allowed humans to use the buff. Default value "True" )
RunOnDino=(If set to True, it allowed the use of the buff to the dino. Default value "True")
RunOnOnlyFlyer=(If set to True it allowed the use of the buff only to dino who can fly. Default value "False". Warning: to work "RunOnDino" must be set to "True")
------------------------------------------------------------------------------------------------------------------------------